first commit

e-Paper/Arduino/epd2in13b_V4/epd2in13b_V4.ino

@@ -0,0 +1,104 @@
+/**
+ *  @filename   :   epd2in13b_V4-demo.ino
+ *  @brief      :   2.13inch e-paper display (B) V4 demo
+ *  @author     :   Waveshare
+ *
+ *  Copyright (C) Waveshare     April 25 2022
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documnetation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to  whom the Software is
+ * furished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <SPI.h>
+#include "epd2in13b_V4.h"
+#include "imagedata.h"
+#include "epdpaint.h"
+
+#define COLORED     0
+#define UNCOLORED   1
+unsigned char image[4000/4 + 50];
+
+void setup() {
+  // put your setup code here, to run once:
+  Serial.begin(115200);
+  Epd epd;
+
+  if (epd.Init() != 0) {
+    Serial.print("e-Paper init failed");
+    return;
+  }
+
+  /* This clears the SRAM of the e-paper display */
+  epd.ClearFrame();
+
+  /**
+    * Due to RAM not enough in Arduino UNO, a frame buffer is not allowed.
+    * In this case, a smaller image buffer is allocated and you have to 
+    * update a partial display several times.
+    * 1 byte = 8 pixels, therefore you have to set 8*N pixels at a time.
+    */
+  Paint paint(image, 128, 63);    //width should be the multiple of 8
+
+  paint.Clear(UNCOLORED);
+  paint.DrawStringAt(8, 2, "e-Paper Demo", &Font12, COLORED);
+  
+  epd.Display(image);//1
+  
+  paint.Clear(UNCOLORED);
+  paint.DrawRectangle(2,2,50,50,COLORED);
+  paint.DrawLine(2,2,50,50,COLORED);
+  paint.DrawLine(2,50,50,2,COLORED);
+
+  epd.Display(image);//2
+  
+  paint.Clear(UNCOLORED);
+  paint.DrawCircle(25,25,20,COLORED);
+  epd.Display(image);//3
+  
+  paint.Clear(UNCOLORED);
+  epd.Display(image);//4
+  
+  paint.Clear(UNCOLORED);
+  paint.DrawStringAt(8, 20, "Hello world", &Font12, COLORED);
+  epd.Display(image);//5
+  
+  paint.Clear(UNCOLORED);
+  paint.DrawFilledRectangle(52,2,100,50,COLORED);
+  paint.DrawLine(52,2,100,50,UNCOLORED);
+  paint.DrawLine(100,2,52,50,UNCOLORED);
+  epd.Display(image);//6
+  
+  paint.Clear(UNCOLORED);
+  paint.DrawFilledCircle(75,25,20,COLORED);
+  epd.Display(image);//7
+  
+  paint.Clear(UNCOLORED);
+  epd.Display(image);//8
+
+  delay(2000);
+  /* This displays an image */
+  epd.DisplayFrame(gImage_2in13b_V4b, gImage_2in13b_V4r);
+
+  /* Deep sleep */
+  epd.Sleep();
+}
+
+void loop() {
+  // put your main code here, to run repeatedly:
+
+}