first commit

This commit is contained in:
KacperLa 2026-01-15 10:21:39 -05:00
commit 9005e49d82
3071 changed files with 1941927 additions and 0 deletions

View file

@ -0,0 +1,189 @@
/**
* @filename : epd5in83_V2.h
* @brief : Header file for e-paper library epd5in83_V2.cpp
* @author : MyMX from Waveshare
*
* Copyright (C) Waveshare Nov 09 2020
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documnetation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <stdlib.h>
#include "epd5in83_V2.h"
Epd::~Epd() {
};
Epd::Epd() {
reset_pin = RST_PIN;
dc_pin = DC_PIN;
cs_pin = CS_PIN;
busy_pin = BUSY_PIN;
width = EPD_WIDTH;
height = EPD_HEIGHT;
};
int Epd::Init(void) {
if (IfInit() != 0) {
return -1;
}
Reset();
SendCommand(0x01); //POWER SETTING
SendData (0x07);
SendData (0x07); //VGH=20V,VGL=-20V
SendData (0x3f); //VDH=15V
SendData (0x3f); //VDL=-15V
SendCommand(0x04); //POWER ON
DelayMs(100);
WaitUntilIdle(); //waiting for the electronic paper IC to release the idle signal
SendCommand(0X00); //PANNEL SETTING
SendData(0x1F); //KW-3f KWR-2F BWROTP 0f BWOTP 1f
SendCommand(0x61); //tres
SendData (0x02); //source 648
SendData (0x88);
SendData (0x01); //gate 480
SendData (0xE0);
SendCommand(0X15);
SendData(0x00);
SendCommand(0X50); //VCOM AND DATA INTERVAL SETTING
SendData(0x10);
SendData(0x07);
SendCommand(0X60); //TCON SETTING
SendData(0x22);
return 0;
}
/**
* @brief: basic function for sending commands
*/
void Epd::SendCommand(unsigned char command) {
DigitalWrite(dc_pin, LOW);
SpiTransfer(command);
}
/**
* @brief: basic function for sending data
*/
void Epd::SendData(unsigned char data) {
DigitalWrite(dc_pin, HIGH);
SpiTransfer(data);
}
/**
* @brief: Wait until the busy_pin goes HIGH
*/
void Epd::WaitUntilIdle(void) {
do {
SendCommand(0x71);
DelayMs(50);
}
while(!DigitalRead(busy_pin));
DelayMs(50);
}
/**
* @brief: module reset.
* often used to awaken the module in deep sleep,
* see Epd::Sleep();
*/
void Epd::Reset(void) {
DigitalWrite(reset_pin, HIGH);
DelayMs(200);
DigitalWrite(reset_pin, LOW); //module reset
DelayMs(5);
DigitalWrite(reset_pin, HIGH);
DelayMs(200);
}
void Epd::DisplayFrame(const unsigned char* frame_buffer, char part) {
/**
* Size of a single array cannot be larger than 32K in AVR GCC, therefore
* you have to split the image data () into 2 parts
*/
unsigned int Width, Height, i, j;
Width = (width % 8 == 0)? (width / 8 ): (width / 8 + 1);
Height = height;
if(part == 1) {
SendCommand(0x10);
for(i=0;i<Height;i++) {
for(j=0; j<Width; j++) {
SendData(0x00);
}
}
SendCommand(0x13);
}
for(i=0;i<Height/2;i++) {
for(j=0; j<Width; j++) {
SendData(~pgm_read_byte(&frame_buffer[i*Width + j]));
}
}
if(part == 2)
TurnOnDisplay();
}
void Epd::Clear(void)
{
unsigned int Width, Height, i;
Width = (width % 8 == 0)? (width / 8 ): (width / 8 + 1);
Height = height;
SendCommand(0x10);
for(i=0; i<Width*Height; i++) {
SendData(0x00);
}
SendCommand(0x13);
for(i=0; i<Width*Height; i++) {
SendData(0x00);
}
TurnOnDisplay();
}
void Epd::TurnOnDisplay(void)
{
SendCommand(0x12);
DelayMs(100);
WaitUntilIdle();
}
/**
* @brief: After this command is transmitted, the chip would enter the
* deep-sleep mode to save power.
* The deep sleep mode would return to standby by hardware reset.
* The only one parameter is a check code, the command would be
* executed if check code = 0xA5.
* You can use EPD_Reset() to awaken
*/
void Epd::Sleep(void) {
SendCommand(0X02);
WaitUntilIdle();
SendCommand(0X07);
SendData(0xa5);
}
/* END OF FILE */

View file

@ -0,0 +1,62 @@
/**
* @filename : epd5in83_V2.h
* @brief : Header file for e-paper library epd5in83_V2.cpp
* @author : MyMX from Waveshare
*
* Copyright (C) Waveshare Nov 09 2020
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documnetation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef EPD5IN83_V2_H
#define EPD5IN83_V2_H
#include "epdif.h"
// Display resolution
#define EPD_WIDTH 648
#define EPD_HEIGHT 480
class Epd : EpdIf {
public:
Epd();
~Epd();
int Init(void);
void DisplayFrame(const unsigned char* frame_buffer, char part);
void Clear(void);
void Sleep(void);
private:
unsigned int reset_pin;
unsigned int dc_pin;
unsigned int cs_pin;
unsigned int busy_pin;
unsigned long width;
unsigned long height;
void WaitUntilIdle(void);
void Reset(void);
void SendCommand(unsigned char command);
void SendData(unsigned char data);
void TurnOnDisplay(void);
};
#endif /* EPD5IN83_H */
/* END OF FILE */

View file

@ -0,0 +1,48 @@
/**
* @filename : epd5in83_V2-demo.ino
* @brief : 5.83inch V2 e-paper display demo
* @author : MyMX from Waveshare
*
* Copyright (C) Waveshare Nov 09 2020
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documnetation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <SPI.h>
#include "epd5in83_V2.h"
#include "imagedata.h"
void setup() {
// put your setup code here, to run once:
Serial.begin(115200);
Epd epd;
if (epd.Init() != 0) {
Serial.println("e-Paper init failed");
return;
}
epd.DisplayFrame(gImage_5in83_V2_p1, 1); //no enough flash rom
epd.DisplayFrame(gImage_5in83_V2_p1, 2);
delay(5000);
epd.Clear();
}
void loop() {
// put your main code here, to run repeatedly:
}

View file

@ -0,0 +1,68 @@
/**
* @filename : epdif.cpp
* @brief : Implements EPD interface functions
* Users have to implement all the functions in epdif.cpp
* @author : Yehui from Waveshare
*
* Copyright (C) Waveshare August 10 2017
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documnetation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "epdif.h"
#include <SPI.h>
EpdIf::EpdIf() {
};
EpdIf::~EpdIf() {
};
void EpdIf::DigitalWrite(int pin, int value) {
digitalWrite(pin, value);
}
int EpdIf::DigitalRead(int pin) {
return digitalRead(pin);
}
void EpdIf::DelayMs(unsigned int delaytime) {
delay(delaytime);
}
void EpdIf::SpiTransfer(unsigned char data) {
digitalWrite(CS_PIN, LOW);
SPI.transfer(data);
digitalWrite(CS_PIN, HIGH);
}
int EpdIf::IfInit(void) {
pinMode(CS_PIN, OUTPUT);
pinMode(RST_PIN, OUTPUT);
pinMode(DC_PIN, OUTPUT);
pinMode(BUSY_PIN, INPUT);
pinMode(PWR_PIN, OUTPUT);
DigitalWrite(PWR_PIN, 1);
SPI.begin();
SPI.beginTransaction(SPISettings(2000000, MSBFIRST, SPI_MODE0));
return 0;
}

View file

@ -0,0 +1,52 @@
/**
* @filename : epdif.h
* @brief : Header file of epdif.cpp providing EPD interface functions
* Users have to implement all the functions in epdif.cpp
* @author : Yehui from Waveshare
*
* Copyright (C) Waveshare August 10 2017
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documnetation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef EPDIF_H
#define EPDIF_H
#include <Arduino.h>
// Pin definition
#define RST_PIN 8
#define DC_PIN 9
#define CS_PIN 10
#define BUSY_PIN 7
#define PWR_PIN 6
class EpdIf {
public:
EpdIf(void);
~EpdIf(void);
static int IfInit(void);
static void DigitalWrite(int pin, int value);
static int DigitalRead(int pin);
static void DelayMs(unsigned int delaytime);
static void SpiTransfer(unsigned char data);
};
#endif

File diff suppressed because it is too large Load diff

View file

@ -0,0 +1,29 @@
/**
* @filename : imagedata.h
* @brief : head file for imagedata.cpp
*
* Copyright (C) Waveshare Nov 09 2020
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documnetation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
extern const unsigned char gImage_5in83_V2_p1[]; //one half image data
// extern const unsigned char gImage_5in83_V2_p2[];
/* FILE END */